How to Set Up a Drum Set

[phanthach]

Everyone has trouble finding the perfect way to set up their first drum set. You can take the following steps to make it a little easier
1.Make sure you have all the necessary pieces for your drum set. This includes a drum key.

UK Breakbeat RecordingsFresh new drum and bass releases from the UK Breakbeat imprint

2.Find a good area to set up your drum set.
3.Put your bass drum on the floor vertically so that the brand name is facing away from where you want to sit.
4.Get the two legs that attach into the bass drum and slip them into the holes and tighten their hold by turning the knobs, be sure that the bass drum itself is a little above the ground so that the legs take most of the weight.
5Get your throne and use the lever under the seat to adjust the height. This should be comfortable for you. Most drummers play with their knees bent at approximately a 90 degree angle. Be sure that you are at an angle where you are most comfortable with your foot on the bass drum pedal.
6.Find the snare stand and place the snare drum onto the stand.
7.Adjust the height so that it is at a comfortable height for you to hit without hitting your knees. This is usually a little higher then your legs.
8.Take both the Toms and attach them onto the Bass Drum similarly to how you attached the legs to the Bass Drum. The way the Toms attach will differ between drum brands, make sure to check the Factory set-up guide.
9.Get the floor Tom and attach all 3 of its legs just like you did for the Bass Drum.
10.Make the height of the Floor Tom equal or close to the Snare.
11.Put the bottom Hihat cymbal onto the top of the Hihat stand (this is the on with the pedal). This cymbal just sits there, it does not screw into anything.
12.Unscrew the bottom nut on the Hihat clutch (this is what holds the top Hihat cymbal to the Hihat stand) Take the top Hihat cymbal and place it between the 2 felts inside the Hihat Clutch. Screw the nut back on the bottom and put the Hihat clutch onto the Hihat stand.
13.Take the Ride Cymbal and slip in onto one of the cymbal stands. Tighten the knob and adjust the height of the cymbal so its comfortable.
14.Repeat the previous step for the remainder of your cymbals.
Ads by Google

Interroll Belt Pulleysbelt drives, belt conveyors drive pulleys, drum gearmotors
Drum Loops + Drum SamplesDownload 1000's of Loops + Samples! Hip Hop, Urban, & Pop Drum Loops.
ModernBeats.com/100MBFreeLoops
----------------------------
franchise opportunities
employee benefit management

[ksubbanaidu]

Iguana Pets
Steak London


IN BRINGING THE NEW YORK STEAKHOUSE TO MAYFAIR, OUR SPECIALIST CHEFS LEAVE NO STONE UNTURNED IN OUR QUEST TO SERVE YOU THE MOST TENDER FULL FLAVOURED STEAK IN LONDON ONLY EVER USING THE FINEST PRIME BEEF, WE SELECT INDIVIDUAL CUTS FROM TRACEABLE, GRAIN-FED HERDS. THOSE CUTS THAT MAKE THE GOODMAN GRADE ARE MATURED IN OUR OWN DRY AGING ROOM, HAND CUT AND COOKED TO PERFECTION OVER CHARCOAL TO PRODUCE THE GREATEST STEAK IN THE CAPITAL.

WHILST STEAKS ARE KING AT GOODMAN, OUR ALL-DAY-MENU FEATURES PLENTY OF OTHER TEMPTING OPTIONS THAT YOU ARE SURE TO ENJOY.

COMPLEMENTING THE EXCELLENT MENU, OUR COMPREHENSIVE WINE LIST CATERS FOR EVERY TASTE, OCCASION AND BUDGET, RANGING FROM SIMPLE RUSTIC REDS BY THE GLASS TO CELEBRATORY BOTTLES OF CHAMPAGNE.

NAMED IN HONOUR OF JAZZ LEGEND BENNY, GOODMAN HITS EXACTLY THE RIGHT NOTES AS THE PERFECT PLACE TO ENJOY THE BEST STEAK IN TOWN.

[raj]

How to Set Up a Drum Set

originated by:Anonymous, Mschel, Nancy Shaw, Kimu (see all)
Article pencil Edit Discuss View History



Everyone has trouble finding the perfect way to set up their first drum set. You can take the following steps to make it a little easier.
edit Steps

   1.
      1
      Make sure you have all the necessary pieces for your drum set. This includes a drum key.

      Ads by Google
      RENT Road Cases
      Located in Los Angeles & Nashville Ph: 818-225-1950 Cell: 818-203-2477
      www.roadcaserentals.com
   2.
      2
      Find a good area to set up your drum set.
   3.
      3
      Put your bass drum on the floor vertically so that the brand name is facing away from where you want to sit.
   4.
      4
      Get the two legs that attach into the bass drum and slip them into the holes and tighten their hold by turning the knobs, be sure that the bass drum itself is a little above the ground so that the legs take most of the weight.
   5.
      5
      Get your throne and use the lever under the seat to adjust the height. This should be comfortable for you. Most drummers play with their knees bent at approximately a 90 degree angle. Be sure that you are at an angle where you are most comfortable with your foot on the bass drum pedal.
   6.
      6
      Find the snare stand and place the snare drum onto the stand.
   7.
      7
      Adjust the height so that it is at a comfortable height for you to hit without hitting your knees. This is usually a little higher then your legs.
   8.
      8
      Take both the Toms and attach them onto the Bass Drum similarly to how you attached the legs to the Bass Drum. The way the Toms attach will differ between drum brands, make sure to check the Factory set-up guide.
   9.
      9
      Get the floor Tom and attach all 3 of its legs just like you did for the Bass Drum.
______________________________________________

Forex Training
ri mortgage rates

[penghan]

ksubbanaidu's post is right.

[amittayal76]

Everyone has trouble finding the perfect way to set up their first drum set. You can take the following steps to make it a little easier
1.Make sure you have all the necessary pieces for your drum set. This includes a drum key.

UK Breakbeat RecordingsFresh new drum and bass releases from the UK Breakbeat imprint

2.Find a good area to set up your drum set.
3.Put your bass drum on the floor vertically so that the brand name is facing away from where you want to sit.
4.Get the two legs that attach into the bass drum and slip them into the holes and tighten their hold by turning the knobs, be sure that the bass drum itself is a little above the ground so that the legs take most of the weight.
5Get your throne and use the lever under the seat to adjust the height. This should be comfortable for you. Most drummers play with their knees bent at approximately a 90 degree angle. Be sure that you are at an angle where you are most comfortable with your foot on the bass drum pedal.
6.Find the snare stand and place the snare drum onto the stand.
7.Adjust the height so that it is at a comfortable height for you to hit without hitting your knees. This is usually a little higher then your legs.
8.Take both the Toms and attach them onto the Bass Drum similarly to how you attached the legs to the Bass Drum. The way the Toms attach will differ between drum brands, make sure to check the Factory set-up guide.
9.Get the floor Tom and attach all 3 of its legs just like you did for the Bass Drum.
10.Make the height of the Floor Tom equal or close to the Snare.
11.Put the bottom Hihat cymbal onto the top of the Hihat stand (this is the on with the pedal). This cymbal just sits there, it does not screw into anything.
12.Unscrew the bottom nut on the Hihat clutch (this is what holds the top Hihat cymbal to the Hihat stand) Take the top Hihat cymbal and place it between the 2 felts inside the Hihat Clutch. Screw the nut back on the bottom and put the Hihat clutch onto the Hihat stand.
13.Take the Ride Cymbal and slip in onto one of the cymbal stands. Tighten the knob and adjust the height of the cymbal so its comfortable.
14.Repeat the previous step for the remainder of your cymbals.
Ads by Google

Interroll Belt Pulleysbelt drives, belt conveyors drive pulleys, drum gearmotors
Drum Loops + Drum SamplesDownload 1000's of Loops + Samples! Hip Hop, Urban, & Pop Drum Loops.
ModernBeats.com/100MBFreeLoops
......................................................................


HGH
pimples

[guitarlover]

Thanks a lot for the amazing post about the steps to adjust drum set.